*

Account

Welcome, Guest. Please login or register.
Did you miss your activation email?
December 04, 2024, 01:26:24 pm

Login with username, password and session length

Resources

Recent posts

[November 01, 2024, 12:46:37 pm]

[October 05, 2024, 07:29:20 am]

[September 05, 2024, 01:54:13 pm]

[July 16, 2024, 11:30:34 pm]

[June 22, 2024, 06:49:40 am]

[March 08, 2024, 12:13:38 am]

[March 08, 2024, 12:12:54 am]

[March 08, 2024, 12:09:37 am]

[December 30, 2023, 08:00:58 pm]

[February 04, 2023, 11:46:41 am]
Pages: [1] 2   Go Down
  Print  
Author Topic: To Fldash  (Read 8632 times)
0 Members and 1 Guest are viewing this topic.
Stuart750 Offline
EIR Veteran
Posts: 438



« on: January 22, 2008, 06:24:23 pm »

New IP is set: 192.168.2.2
Subnet mask: 255.255.255.0
Default Gateway is: 192.168.2.1

I try to release, it says The operation failed as no adapter is in the state permissible for this operation

I try to renew, it says the same thing...

Logged
Apophiss Offline
EIR Veteran
Posts: 76


« Reply #1 on: January 22, 2008, 08:19:53 pm »

are you trying to release a static IP (one you put in?) or a dynamic one?  It only works on dynamic, so all your settings should be set to automatically get the IP...


Now this doesnt work with port forwarding so, that could be your problem.
Logged
fldash Offline
Founder
*
Posts: 9755


« Reply #2 on: January 22, 2008, 08:47:50 pm »

Yea, release/renew is only valid if you have it in Obtain IP Address automatically.  You need to keep resetting your modem until you get an internet connection under that IP 192.168.2.2 and can access those links I gave you.
Logged
Loik Offline
EIR Veteran
Posts: 77


« Reply #3 on: January 22, 2008, 09:37:55 pm »

rofl you told him to release before you taught him to renew, lawls
Logged
Stuart750 Offline
EIR Veteran
Posts: 438



« Reply #4 on: January 23, 2008, 11:55:12 am »

Oh, fldash, I tried the following link, and it said it was denied again....

192.168.2.1/dmzcfg.htm


Logged
fldash Offline
Founder
*
Posts: 9755


« Reply #5 on: January 23, 2008, 11:56:17 am »

Yes, it will say that unless you change your IP back to 192.168.2.2
Logged
fldash Offline
Founder
*
Posts: 9755


« Reply #6 on: January 23, 2008, 11:58:03 am »

If you change it back, you can click on that dmzcfg.htm and set it to the default selection (I believe was the top radio button).  Click Apply and reset your modem.  It may be beneficial for you to keep using 192.168.2.2 instead of going back to obtain IP address automatically (DHCP).  That in itself might resolve some issues since your modem is pretty picky.
Logged
fldash Offline
Founder
*
Posts: 9755


« Reply #7 on: January 23, 2008, 12:01:17 pm »

http://192.168.2.1/fwcfg.html

You may also want to check that link and turn off the firewall if it's on.
Logged
fldash Offline
Founder
*
Posts: 9755


« Reply #8 on: January 23, 2008, 12:44:25 pm »

Even when you are back on 192.168.2.2?
Logged
Stuart750 Offline
EIR Veteran
Posts: 438



« Reply #9 on: January 23, 2008, 12:51:41 pm »

I fixed it... There we go
I'm allowed to do the stuff now...

Firewall IS off
Logged
Stuart750 Offline
EIR Veteran
Posts: 438



« Reply #10 on: January 23, 2008, 12:53:29 pm »

So as far as things go, what should I have selected here?

Current DMZ Status:   Enabled
Current DMZ Host IP Address:   192.168.2.10
 
 Options Below
 ->Disable DMZ  (-> means it's currently the selected option)
 -Enable DMZ with this Host IP address:    192.168.2.10
 -Enable DMZ with this Host IP address   (Same as above)
 2nd set of options
 -Make Settings Permanent
 ->Make Settings Last Until Modem Reboots
 -Make Settings Last For:   minutes
Logged
fldash Offline
Founder
*
Posts: 9755


« Reply #11 on: January 23, 2008, 12:54:24 pm »

Let's leave your IP at 192.168.2.2 and set the DMZ to that...  Can you take a Screenshot of that DMZ screen and post it for me...
Logged
Stuart750 Offline
EIR Veteran
Posts: 438



« Reply #12 on: January 23, 2008, 12:57:16 pm »

set DMZ to what?

Here's a screenshot


[attachment deleted by admin]
Logged
fldash Offline
Founder
*
Posts: 9755


« Reply #13 on: January 23, 2008, 01:03:41 pm »

When you went to that screen was disable DMZ selected?  That's bunk! 

Click Enable DMZ with this IP Address: 192.168.2.2

Click Make Settings Permanent

Click Apply

Turn off your modem and back on...

Re-access the DMZ page to see if the settings stuck.
Logged
Stuart750 Offline
EIR Veteran
Posts: 438



« Reply #14 on: January 23, 2008, 01:14:07 pm »

I tried to connect to some people, and it didn't work...

Couldn't connect to anyone.. althougth every player was already on my list...

Frsd, DrunkDragoon, Captain Axis, BradAnderson (BradAxis), (Axis)Slowzo

And a test with Viv failed as well (he was also already on my list)
« Last Edit: January 23, 2008, 01:20:02 pm by Stuart750 » Logged
Stuart750 Offline
EIR Veteran
Posts: 438



« Reply #15 on: January 23, 2008, 01:21:31 pm »

We can work on it later tonight if you don't mind. I'll keep LogMeIn on, and if someone is on, just get off, because my family isn't very attentive... at all... whatsever...
Logged
fldash Offline
Founder
*
Posts: 9755


« Reply #16 on: January 23, 2008, 01:22:28 pm »

Did you confirm DMZ was still set?
Logged
fldash Offline
Founder
*
Posts: 9755


« Reply #17 on: January 23, 2008, 01:22:51 pm »

And you are still using 192.168.2.2 as your IP right?
Logged
Phil Offline
ARRRRRRRRRRRRRRRRR
*
Posts: 2886

Phil's fkin batman!
Phil also owns the moon.

« Reply #18 on: January 23, 2008, 02:19:11 pm »

Just so you know, fldash is a newbie and you shouldn't trust him =D
Logged
Stuart750 Offline
EIR Veteran
Posts: 438



« Reply #19 on: January 23, 2008, 04:58:21 pm »

Yes, my Ip is 192.168.2.2

Default Gateway is 192.168.2.1
Logged
Pages: [1] 2   Go Up
  Print  
 
Jump to:  

TinyPortal v1.0 beta 4 © Bloc
Powered by MySQL Powered by PHP Powered by SMF 1.1.9 | SMF © 2006-2009, Simple Machines LLC
Valid XHTML 1.0! Valid CSS!
Page created in 0.083 seconds with 35 queries.